Seeed Technology RG-15-RS232 - Seeed Industrial-Grade RS232 Optical Rain Gauge RG-15 Rain Sensor
You May Also Like
SS11-Sensor-Shelter-Kit - Milesight SS11-Sensor-Shelter-Kit for the EM320TH for Outdoor Deployments
EM300-MLD-915M - Milesight LoRaWAN AU915/AS923 Membrane Leak Sensor
VS373-915M - Milesight AS923 LoRaWAN Radar Fall Detection Sensor
CT310-915M - Milesight LoRaWAN AS923/AU915 Smart Current Transformer CT310 With 3 Phase 1000A Current Capacity
VS351-915M - Milesight VS351 LoRaWAN AS923 Mini AI Thermopile People Counter (USB-C)
Features
NPort 5600-8-DT device servers can conveniently and transparently connect 8 serial devices to an Ethernet network, allowing you to network your existing serial devices with only basic configuration. You can both centralize management of your serial devices and distribute management hosts over the network. Since the NPort 5600-8-DT device servers have a smaller form factor compared to our 19-inch models, they are a great choice for applications that need additional serial ports, but for which mounting rails are not available.
- 8 serial ports supporting RS-232/422/485
- Compact desktop design
- 10/100M auto-sensing Ethernet
- Easy IP address configuration with LCD panel
- Configure by Telnet, web browser, or Windows utility
- Socket modes: TCP server, TCP client, UDP, Real COM
- SNMP MIB-II for network management
Convenient Design for RS-485 Applications
The NPort 5650-8-DT device servers support selectable 1 kilo-ohm and 150 kilo-ohms pull high/low resistors and a 120-ohm terminator. In some critical environments, termination resistors may be needed to prevent the reflection of serial signals. When using termination resistors, it is also important to set the pull high/low resistors correctly so that the electrical signal is not corrupted. Since no set of resistor values is universally compatible with all environments, NPort 5600-8-DT device servers use DIP switches to allow users to adjust termination and pull high/low resistor values manually for each serial port.
Convenient Power Inputs
The NPort 5650-8-DT device servers support both power terminal blocks and power jacks for ease of use and greater flexibility. Users can connect the terminal block directly to a DC power source, or use the power jack to connect to an AC circuit through an adapter.
LED Indicators to Ease Your Maintenance Tasks
The System LED, Serial Tx/Rx LEDs, and Ethernet LEDs (located on the RJ45 connector) provide a great tool for basic maintenance tasks and help engineers analyze problems in the field. The NPort 5600's LEDs not only indicate current system and network status, but also help field engineers monitor the status of attached serial devices.
Two Ethernet Ports for Convenient Cascade Wiring
The NPort 5600-8-DT device servers come with two Ethernet ports that can be used as Ethernet switch ports. Connect one port to the network or server, and the other port to another Ethernet device. The dual Ethernet ports eliminate the need to connect each device to a separate Ethernet switch, reducing wiring costs.
Specifications
Technical Specifications
| 10/100BaseT(X) Ports (RJ45 connector) | 2 |
|---|---|
| Magnetic Isolation Protection | 1.5 kV (built-in) |
| Configuration Options | Serial ConsoleTelnet ConsoleWeb Console (HTTP/HTTPS)Windows Utility |
| Management | ARP, BOOTP, DHCP Client, DNS, HTTP, HTTPS, ICMP, IPv4, LLDP, Rtelnet, SMTP, SNMPv1/v2c, TCP/IP, Telnet, UDP |
| Filter | IGMP v1/v2 |
| Windows Real COM Drivers | Windows 11/10/8.1/8/7/Vista/XP/ME/98/95Windows Server 2022/2019/2016/2012 R2/2012/2008 R2/2008/2003Windows Embedded CE 6.0/5.0, Windows XP Embedded |
| Linux Real TTY Drivers | Kernel versions: 6.x, 5.x, 4.x, 3.x, 2.6.x, and 2.4.x |
| Fixed TTY Drivers | macOS Versions: 11.x, 10.12 to 10.15SCO UNIX, SCO OpenServer, SCO UnixWare 7, Sun Solaris 10, QNX 4.25, QNX 6.x, Solaris 10, FreeBSD, AIX 5.x, HP-UX 11i, Mac OS X |
| Arm®-based Platform Support | Linux Kernel 5.x/4.x |
| Virtual Machine | VMWare ESXi (Windows 11/10)VMware Fusion (Windows on macOS 10.12 to 11.x)Parallels Desktop (Windows on macOS 10.12 to 11.x) |
| Android API | Android 3.1.x and later |
| Time Management | SNTP |
| MIB | RFC1213, RFC1317 |
| Authentication | Local database |
| Encryption | HTTPS, AES-128, RSA-1024, SHA-1, SHA-256 |
| Security Protocols | HTTPS (TLS 1.2)SNMPv3 |
| Connector | DN9 male |
| No. of Ports | 8 |
| Serial Standards | RS-232 |
| Baudrate | Supports standard baudrates (unit=bps): 50, 75, 110, 134, 150, 300, 600, 1200, 1800, 2400, 4800, 7200, 9600, 19200, 38400, 57600, 115200, 230.4k, 460.8k, 921.6k |
| Data Bits | 5, 6, 7, 8 |
| Stop Bits | 1, 1.5, 2 |
| Parity | None, Even, Odd, Space, Mark |
| Flow Control | RTS/CTS, DTR/DSR, XON/XOFF |
| Pull High/Low Resistor for RS-485 | 1 kilo-ohm, 150 kilo-ohms |
| Terminator for RS-485 | 120 ohms |
| RS-485 Data Direction Control | Automatic Data Direction Control (ADDC) |
| Isolation | -I models: 2 kV |
| Surge | 0.5 kV |
| Console Port | RS-232 (TxD, RxD, GND), 3-pin (19200, n, 8, 1) |
| RS-232 | TxD, RxD, RTS, CTS, DTR, DSR, DCD, GND |
| RS-422 | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-4w | Tx+, Tx-, Rx+, Rx-, GND |
| RS-485-2w | Data+, Data-, GND |
| Input Current | 611 mA @ 12 VDC |
| No. of Power Inputs | 2 |
| Input Voltage | 12 to 48 VDC |
| Reverse Polarity Protection | Supported |
| Source of Input Power | TB, Power input jack |
| Automatic Reboot Trigger | Built-in WDT |
| Alert Tools | Built-in buzzer and RTC (real-time clock) |
| Housing | Metal |
| Dimensions (with ears) | 229 x 46 x 125 mm (9.01 x 1.81 x 4.92 in) |
| Dimensions (without ears) | 197 x 44 x 125 mm (7.76 x 1.73 x 4.92 in) |
| Dimensions (with DIN-rail kit on bottom panel) | 197 x 53 x 125 mm (7.76 x 2.09 x 4.92 in) |
| Weight | 1,570 g (3.46 lb) |
| Installation | DesktopDIN-rail mounting (with optional kit)Wall mounting (with optional kit) |
| Interactive Interface | LCD panel displayPush buttons for configuration |
| Operating Temperature | 0 to 55°C (32 to 131°F) |
| Storage Temperature (package included) | -40 to 75°C (-40 to 167°F) |
| Ambient Relative Humidity | 5 to 95% (non-condensing) |
| EMC | EN 55032/35 |
| EMI | CISPR 32, FCC Part 15B Class A |
| EMS | IEC 61000-4-2 ESD: Contact: 6 kV; Air: 8 kVIEC 61000-4-3 RS: 80 MHz to 1 GHz: 3 V/mIEC 61000-4-4 EFT: Power: 2 kV; Signal: 0.5 kVIEC 61000-4-5 Surge: Power: 2 kV; Signal: 0.5 kVIEC 61000-4-6 CS: 150 kHz to 80 MHz: 3 V/m; Signal: 3 V/mIEC 61000-4-8 PFMFIEC 61000-4-11 |
| Safety | UL 60950-1IEC 62368-1 |
| Green Product | RoHS, CRoHS, WEEE |
| Time | 836,374 hrs |
| Standards | Telcordia (Bellcore) Standard |
| Brand | Seeed Technology |
|---|---|
| Product Type | Computers & Tablets > Industrial PCs & IoT > Sensors |
| Weight | 0.5 kg |
| Warranty |
|---|
Note:
Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.
Shipping Information
- Free NZ-wide shipping on orders over $299
- Standard delivery 2–5 business days
- Rural delivery may take an additional 1–2 days
- Same-day dispatch for orders placed before 2pm (weekdays)
Returns Policy
- 7-day returns on unused items in original packaging
- Faulty or damaged products covered under warranty
- Contact our support team to initiate a return