TP-Link TL-SG2428LP - TP LINK SG2428LP Omada 28-Port Gigabit Smart Switch with 16-Port PoE+
Features
SG2428LP
Omada 28-Port Gigabit Smart Switch with 16-Port PoE+
- 16x Gigabit 802.3af/at PoE+ ports
- 8x Gigabit non-PoE RJ45 ports and 4x Gigabit SFP slots
- 150 W total PoE budget with up to 30 W PoE output per port**
- Centralized cloud management via the web or the Omada app*
- Standalone management via web, CLI, SNMP, and RMON
- Static Routing helps route internal traffic for higher efficiency
- VLAN, ACL, QoS, and IGMP Snooping
- Fanless design for quiet operation
- Durable metal casing and rackmountable design
*These functions require the use of the Omada SDN Controller. Zero-Touch Provisioning requires the use of the Omada Cloud-Based Controller. Go to the Omada Cloud-Based Controller Product List to find all the models supported by the Omada Cloud-Based Controller.
**PoE budget calculations are based on laboratory testing. The actual PoE power budget is not guaranteed and will vary due to client limitations and environmental factors.
Specifications
Technical Specifications
| Interface | - 16× 10/100/1000 Mbps PoE+ RJ45 Ports (Auto Negotiation/Auto MDI/MDIX)- 8× 10/100/1000 Mbps non-PoE RJ45 Ports (Auto Negotiation/Auto MDI/MDIX)- 4× Gigabit SFP Slots |
|---|---|
| Fan Quantity | Fanless |
| Physical Security Lock | Yes |
| Power Supply | 100-240V AC, 50/60Hz |
| PoE Ports (RJ45) | - Standard: 802.3at/af compliant- PoE+ Ports: 16 Ports (up to 30 W PoE Output per Port)- PoE Power Budget: 150 W** |
| Dimensions ( W x D x H ) | 17.3×8.7×1.73 in (440×220×44 mm) |
| Mounting | Rack Mountable |
| Max Power Consumption | 184.7 W (110V/60Hz) (with 150 W PD connected) |
| Max Heat Dissipation | 628.0 BTU/hr (110V/60 Hz) (with 150 W PD connected) |
| Switching Capacity | 56 Gbps |
| Packet Forwarding Rate | 41.66 Mpps |
| MAC Address Table | 8K |
| Packet Buffer Memory | 4.1 Mbit |
| Jumbo Frame | 9 KB |
| Quality of Service | - 802.1p CoS/DSCP priority- 8 priority queues- Priority Schedule Mode: SP (Strict Priority), WRR (Weighted Round Robin)- Queue Weight Config- Bandwidth Control: Port/Flow-based Rating Limit- Smoother Performance- Storm Control: Multiple Control Modes(kbps/ratio), Broadcast/Multicast/Unknown-Unicast Control |
| L2 and L2+ Features | - 16 IP Interfaces: Support IPv4/IPv6 Interface- Static Routing: 32 IPv4/IPv6 Static Routes- DHCP Server- DHCP Relay- DHCP Interface Relay- DHCP VLAN Relay- DHCP L2 Relay- Static ARP- Proxy ARP- Gratuitous ARP- Link Aggregation- Spanning Tree Protocol- Loopback Detection- 802.3x Flow Control- Mirroring- Device Link Detect Protocol (DLDP)- 802.1ab LLDP/ LLDP-MED |
| L2 Multicast | - 511 IPv4, IPv6 shared multicast groups- IGMP Snooping- Multicast VLAN Registration (MVR)- Multicast Filtering- Limited IP Multicast (256 profiles and 16 entries per profile) |
| Advanced Features | - Automatic Device Discovery*- Batch Configuration*- Batch Firmware Upgrading*- Intelligent Network Monitoring*- Abnormal Event Warnings*- Unified Configuration*- Reboot Schedule* |
| VLAN | - VLAN Group: Max. 4K VLAN Groups- 802.1Q tag VLAN- MAC VLAN: 12 Entries- Protocol VLAN- GVRP- Voice VLAN |
| Access Control List | - Support up to 230 entries- Time-based ACL- MAC ACL- IP ACL- IPv6 ACL- Combined ACL- Rule Operation: Permit/Deny- Policy Action- Mirroring- Redirect- Rate Limit- QoS Remark- ACL Rules Binding- Port Binding- VLAN Binding |
| Security | - IP-MAC-Port Binding- AAA- 802.1X- Port based authentication- MAC (Host) based authentication- Authentication Method includes PAP/EAP-MD5- MAB- Guest VLAN- Radius authentication and accountability support- IP/IPv6-MAC Binding- 512 Binding Entries- DHCP Snooping- DHCPv6 Snooping- ARP Inspection- ND Detection- IP Source Guard- 253 Entries- Source IP+Source MAC- IPv6 Source Guard- 183 Entries- Source IPv6 Address+Source MAC- DoS Defend- Static/Dynamic/Permanent Port Security: Up to 64 MAC addresses per port- Broadcast/Multicast/Unicast Storm Control: kbps/ratio control mode- Port Isolation- Secure web management through HTTPS with SSLv3/TLS 1.2- Secure Command Line Interface (CLI) management with SSHv1/SSHv2- IP/Port/MAC-based access control |
| IPv6 | - IPv6 Static Routing and ACL- IPv6 Dual IPv4/IPv6- IPv6 Interface- Multicast Listener Discovery (MLD) Snooping- IPv6 neighbor discovery (ND)- Path maximum transmission unit (MTU) discovery- Internet Control Message Protocol (ICMP) version 6- TCPv6/UDPv6- IPv6 applications: DHCPv6 Client, Ping6, Tracert6, Telnet(v6), IPv6 SNMP, IPv6 SSH, IPv6 SSL, Http/Https, IPv6 TFTP |
| MIBs | - MIB II (RFC1213)- Bridge MIB (RFC1493)- P/Q-Bridge MIB (RFC2674)- Radius Accounting Client MIB (RFC2620)- Radius Authentication Client MIB (RFC2618)- Remote Ping, Traceroute MIB (RFC2925)- Support TP-Link private MIBs- RMON MIB(RFC1757, rmon 1,2,3,9) |
| Omada App | Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Centralized Management | - Omada Cloud-Based Controller- Omada Hardware Controller- Omada Software Controller |
| Cloud Access | Yes. Requiring the use of Omada Hardware Controller, Omada Cloud-Based Controller, or Omada Software Controller. |
| Zero-Touch Provisioning | Yes. Requiring the use of Omada Cloud-Based Controller |
| Management Features | - Web-based GUI- Command Line Interface (CLI) through telnet- SNMPv1/v2c/v3- SNMP Trap/Inform- RMON (1,2,3,9 groups)- SDM Template- DHCP/BOOTP Client- Dual Image, Dual Configuration- CPU Monitoring- Cable Diagnostics- EEE- SNTP- System Log |
| Certification | CE, FCC |
| Package Contents | - SG2428LP- Power Cord- Installation Guide- Rackmount Kit- Rubber Feet |
| System Requirements | Microsoft® Windows® XP, Vista™ or Windows 7/8/10/11, MAC® OS, NetWare®, UNIX® or Linux. |
| Environment | - Operating Temperature: 0-40 ? (32-104 ?);- Storage Temperature: -40-70 ? (-40-158 ?)- Operating Humidity: 10-90% RH non-condensing- Storage Humidity: 5-90% RH non-condensing |
| Brand | TP-Link |
|---|---|
| Product Type | Networking > Switches |
| Weight | 0.5 kg |
| Warranty |
|---|
Note:
Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.
Shipping Information
- Free NZ-wide shipping on orders over $299
- Standard delivery 2–5 business days
- Rural delivery may take an additional 1–2 days
- Same-day dispatch for orders placed before 2pm (weekdays)
Returns Policy
- 7-day returns on unused items in original packaging
- Faulty or damaged products covered under warranty
- Contact our support team to initiate a return






