CP-MA-00000980 - DJI Lito X1 360 Propeller Guard

DJI Lito Series 360° Propeller Guard

The lightweight DJI Lito Series 360° Propeller Guard can fully wrap the propellers to avoid injury or damage by obstacles, for improved flight safety. It helps beginners to fly more confidently indoors or in places with many obstacles.

1. Before installing the propeller guard on DJI Lito X1 or DJI Lito 1, ensure that the aircraft firmware has been updated to v01.00.0100 or later. Otherwise, flight stability cannot be guaranteed.
2. The aircraft will weigh more than 250 g after installing the propeller guard. Please carefully check and abide by local laws and regulations. If required, obtain the necessary approval and clearance from the related government agencies before flight.
3. Do not use the propeller guard in windy conditions.
4. When flying with the propeller guard installed, the aircraft's power performance and video transmission performance will be affected. Please control the flight speed, operate with caution, and keep an eye on the video transmission signal strength in the app at all times. When using a remote controller, the maximum takeoff altitude is 1500 m, the maximum flight altitude is 120 m, and the maximum flight distance is 500 m.
5. When flying with the propeller guard installed, the aircraft's obstacle sensing performance will be affected. Please fly in open areas whenever possible.
6. Regulatory requirements vary by country or region. In the EU and UK, the propeller guards can only be compliantly used on the aircraft from DJI Lito X1 Fly More Combo Plus (DJI RC 2). However, in the EU and UK, do not install the propeller guards and the Intelligent Flight Battery Plus at the same time. Otherwise, the total aircraft weight may exceed the applicable regulatory weight limit and may result in operational requirements. Always check and comply with local laws and regulations before flight.