GAT-USBC-PD - PoE World GAT-USB-C-PD Isolated Splitter power + Data for USB-C to 25 watts

This device provides a powerful solution for delivering power and wired Ethernet data to a USB-C device over 328ft of network cable. This splitter allows power to be carried on CAT-5e or CAT-6 network cables using either 802.3at standard or 56 volt passive PoE. 802.3af switches can also be used - but only 12 watts can be delivered without overload. 10/100/1000 or 10/100 switches can be used - the device will negotiate at 10/100 full duplex rates.

Intended for use with any 802.3at PoE switch - this active PoE solution negotiates with the switch to activate power and provide it to the client device. It is a compact and cost effective power solution. The PoE switch supplies 48 or 56 volts DC at the source location. The higher DC voltage means the current is reduced by a factor of 9 compared to 5 volts, and then carried with 90% less loss over the Ethernet cable from the source, the USB-C converter at the remote end allows you to extend the charge distance for this application up to 328ft or 100 meters.