POWERSHIELD

POWERSHIELD PSCM2000 - Commander 2000VA Line Interactive Tower UPS Delivers Automatic Emergency AC Power

SKU: PSCM2000 ● In Stock
$1,293.90
inc GST ▲ +GST
Free shipping over $299 Genuine product 7-day returns

Features

-Pure Sine Wave Output

-Output Power Factor 0.9

-Free Programmable Power Management

-Ultra Modern, Informative LCD - Shows Battery Time Remaining

-ECO Mode

-Smart AVR

-Emergency Power Off Function

-Multiple Communication Available with Faster SNMP Card

Specifications

Technical Specifications

Capacity 2000VA/1800W
Topology Line Interactive, Pure Sine Wave
Nominal Voltage 240V AC
Acceptable Voltage Range 162-290V AC
Frequency 50/60Hz ±5Hz (auto sensing)
Voltage Regulation (AC Mode) 240V AC (Selectable 208/220/230V AC) ±10% AVR
Voltage Regulation (Batt. Mode) ± 1.5% (before battery alarm)
Frequency Range (Batt. Mode) 50Hz or 60Hz ±1Hz
Current Crest Ratio 3.1
Total Harmonic Distortion 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm)
Transfer Time 6ms (Typical), 10ms max.
Waveform (Batt. Mode) Pure Sine Wave
AC Mode 98% (Advanced ECO design)
Battery Mode 91%
Standard Model Battery Type & Number: 12V/9AH (x4) Recharge Time: 4 hours recover to 90% capacity
Full Protection Overload, thermal, short circuit, discharge and overcharge protection
Surge Protection 1968J/39000A
Operation Temperature 0°C~40°C
Relative Humidity 0%~90% (RH non-condensing)
Noise Level <45dB
Interface USB and RS-232 as standard, an Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact
Software PowerShield NetGuard® software - supports Windows-based operating system, Linux, Unix and Mac
LCD display AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining
Audible alarm Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload
Dimensions (D x W x H) 455 x 145 x 220mm
Weight 20.5/22.5kg
Safety EN62040-1 -1 2003, IEC 60950-1 -1
EMC EN62040-2 2006
RoHS Directive 2011/65/EU