POWERSHIELD
POWERSHIELD PSCM1100 - Commander 1100VA Line Interactive Tower. Delivers Automatic Emergency AC Power
$833.90
inc GST ▲
+GST
Free shipping over $299
Genuine product
7-day returns
Features
-Pure Sine Wave Output
-Output Power Factor 0.9
-Free, programmable Power Management
-Ultra Modern, Informative LCD - Shows Battery Time Remaining
-ECO Mode
-Smart AVR
-Emergency Power Off Function
-Multiple Communication Available with faster SNMP Card
Specifications
Technical Specifications
| Capacity | 1000VA/990W |
|---|---|
| Topology | Line Interactive, Pure Sine Wave |
| Nominal Voltage | 240V AC |
| Acceptable Voltage Range | 162V~290V AC |
| Frequency | 50/60Hz ±5Hz (auto sensing) |
| Voltage Regulation (AC Mode) | 240V AC (Selectable 208/220/230V AC) ± 10% AVR |
| Voltage Regulation (Batt. Mode) | ± 1.5% (before battery alarm) |
| Frequency Range (Batt. Mode) | 50Hz or 60Hz ±1Hz |
| Current Crest Ratio | 3.1 |
| Total Harmonic Distortion | 2% max @ 100% linear load, 5% max @ 100% non-linear load (before low battery alarm) |
| Transfer Time | 6ms (Typical), 10ms max. |
| Waveform (Batt. Mode) | Pure Sine Wave |
| AC Mode | 98% (Advanced ECO design) |
| Battery Mode | 89% |
| Standard Model | Battery Type & Number: 12V/9AH (x2)Recharge Time: 4 hours recover to 90% capacity |
| Full Protection | Overload, thermal, short circuit, discharge and overcharge protection |
| Surge Protection | 1968J/39000A |
| Operation Temperature | 0°C~40°C |
| Relative Humidity | 0%~90% (RH non-condensing) |
| Noise Level | <45dB |
| Interface | USB and RS-232 as standard, an Intelligent slot for PSSNMP, PSModbus or PSAS400 dry contact |
| Software | PowerShield NetGuard® software - supports Windows-based operating system, Linux, Unix and Mac |
| LCD display | AC mode, Batt. Mode, Load Level, Input Voltage, Output Voltage, Overload, Fault, Battery Replacement, Low Batt., Batt. Time Remaining |
| Audible alarm | Battery Mode, Low Battery (Batt. Mode), Battery Replacement, Fault, Overload |
| Dimensions (D x W x H) | 397 x 145 x 220mm |
| Weight | 12.9/14.4kg |
| Safety | EN62040-1 -1 2003, IEC 60950-1 -1 |
| EMC | EN62040-2 2006 |
| RoHS | Directive 2011/65/EU |
| Brand | POWERSHIELD |
|---|---|
| Product Type | Power & Charging > UPS & Power Distribution |
| Weight | 13.3 kg |
| Warranty |
|---|
Note:
Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.
Shipping Information
- Free NZ-wide shipping on orders over $299
- Standard delivery 2–5 business days
- Rural delivery may take an additional 1–2 days
- Same-day dispatch for orders placed before 2pm (weekdays)
Returns Policy
- 7-day returns on unused items in original packaging
- Faulty or damaged products covered under warranty
- Contact our support team to initiate a return
You May Also Like
VERTIV
VERTIV 2353839 - UPS BYPASS SWITCH FOR PS2200 & GXT4-3000
Switching
$649.56$854.83
inc GST ▲
+GST
DYNAMIX
DYNAMIX RP-ATS - ATS PDU Dual 16A IEC Input 10 Port 10A IEC C13 Output Power Redundancy 8ms Switch Over
Switching
$1,582.60$1,808.39
inc GST ▲
+GST
DYNAMIX
DYNAMIX RPR-15VMCB - 15 Outlet Vertical Power Rail (10A) w/ 6kA C-Curve MCB Circuit Breaker on/off switch
Switching
$233.03$265.90
inc GST ▲
+GST
POWERSHIELD
POWERSHIELD PSMBS2K - External Maintenance Bypass Switch for 1kVA or 2kVA UPS Rackmount Brackets Included
Switching
$421.73
inc GST ▲
+GST