Seagate IronWolf 10TB NAS Internal HDD
Features
Seagate IronWolf 10TB NAS Internal HDD
Designed for use in 1-8 bay NAS environments within home, SOHO, and SMB environments, the 10TB IronWolf 7200 rpm SATA III 3.5" Internal NAS HDD (CMR) from Seagate is built to withstand 24x7 operations, or 8760 hours per year. This 10TB drive has been equipped with a SATA III 6 Gb/s interface, a rotational speed of 7200 rpm, a 3.5" form factor, air drive design, and a 256MB cache, providing users with an ample storage capacity and data transfer speeds of up to 210 MB/s. This IronWolf hard drive also has an MTBF rating of 1 million hours, 600,000 load/unload cycles, 1 in 1015 non-recoverable read errors per bits read, and a workload rate of up to 180TB per year.
Optimized for NAS with AgileArray
AgileArray is built for dual-plane balancing and RAID optimization in multi-bay environments with advanced power management
IronWolf Health Management
IronWolf Health Management focuses on prevention, intervention, and recovery
Reduced Lag Times
Improved performance means reduced lag times or downtime for users during high traffic time for the NAS
Rotational Vibration (RV) Sensors
IronWolf comes standard with RV sensors to maintain high performance in multi-bay NAS enclosures
Multi-User Environments
IronWolf provides a workload rate of 180TB per year, which means that multiple users can upload and download data to the NAS server, knowing that IronWolf can handle the workload, whether you are a creative professional or small business
Designed for Always-On, Always-Accessible 24/7 Performance
Access data on your NAS virtually any time, whether remotely or on site
Cache Memory
IronWolf provides 256MB of cache memory, allowing your NAS to serve data faster
1.0 Million Hours MTBF | Limited 3-Year Warranty
This represents an improved total cost of ownership (TCO) over desktop drives with reduced maintenance costs
Designed for 24x7 Performance
Access your data on your NAS at virtually any time, whether remotely or on site
Best-Fit Applications
1-8 bay business network attached storage (NAS)
Specifications
Technical Specifications
| Formatted (512 bytes/sector) | 10TB |
|---|---|
| Heads | 10 |
| Discs | 5 |
| Bytes per logical sector | 512 |
| Bytes per physical sector | 4096 |
| Recording density, KBPI (Kb/in max) | 2499 |
| Track density, KTPI (ktracks/in, 0 skew) | 487 |
| Areal density, (Gb/in2, @ 0 skew mid-disk) | 1215 |
| Spindle speed (RPM) | 7200 |
| Internal data transfer rate (Mb/s max) | 2169 |
| Sustained data transfer rate OD (MiB/s max) | 200 (210MB/s max) |
| I/O data-transfer rate (MB/s max) | 600 |
| ATA data-transfer modes supported | - PIO modes 0-4- Multiword DMA modes 0-2- Ultra DMA modes 0-6 |
| Cache buffer | 256MB (262,144KB) |
| Weight (maximum) | 720g (1.587 lb) |
| Average latency | 4.16ms |
| Power-on to ready (sec) (typ/max) | 23/30 |
| Standby to ready (sec) (typ/max) | 23/30 |
| Startup current (typical) 12V (peak) | 1.8A |
| Voltage tolerance (including noise) | - 5V ±5%- 12V ±10% |
| Operating ambient temperature (min °C) | 0°C (Ambient) |
| Operating temperature (max °C) | 65°C (Drive Reported Temperature) † |
| Non-Operating temperature | -40° to 70°C (Ambient Temperature, see sections 2.6.1 and 2.10) |
| Temperature gradient (°C per hour max) | - 20°C (operating)- 20°C (nonoperating) |
| Relative humidity | - 5% to 95% (operating)- 5% to 95% (nonoperating) |
| Relative humidity gradient | 20% per hour max |
| Altitude, operating | - -304.8 m to 3,048 m- (-1000 ft to 10,000+ ft) |
| Altitude, nonoperating (below mean sea level, max) | - -304.8 m to 12,192 m- (-1000 ft to 40,000+ ft) |
| Operational Shock (max at 2 ms - typical) | Read 70 Gs / Write 40 Gs |
| Non-Operational Shock (max at 2 ms - typical) | 300 Gs |
| Linear Random Operating Vibration | 10-500 Hz: 1.04Grms |
| Random Rotary Operating Vibration | 20-1500Hz: 12.5 rads/s² |
| Linear Random Non-Operating Vibration | 10-500 Hz: 2.0 Grms ref |
| Idle | - 2.8 (typical)- 3.0 (max)- During periods of drive idle, some offline activity may occur according to theSMART specification, which may increase acoustic and power to operational levels |
| Performance seek 3.2 (typical) | 3.4 (max) |
| Nonrecoverable read errors | 1 sector per 10 bits read |
| Annualized Failure Rate (AFR) | 0.87% based on 8760 POH |
| Maximum Rated Workload | - Maximum rate of <180TB/year- Workloads exceeding the annualized rate may degrade the drive MTBF and impact productreliability. The Annualized Workload Rate is in units of TB per year, or TB per 8760 power onhours. Workload Rate = TB transferred * (8760 / recorded power on hours). |
| Load-unload cycles (command controlled) | 600,000 |
| Supports Hotplug operation per Serial ATA Revision 3.3 specification | Yes |
| Brand | Seagate |
|---|---|
| Product Type | PC Parts |
Shipping Information
- Free NZ-wide shipping on orders over $299
- Standard delivery 2–5 business days
- Rural delivery may take an additional 1–2 days
- Same-day dispatch for orders placed before 2pm (weekdays)
Returns Policy
- 7-day returns on unused items in original packaging
- Faulty or damaged products covered under warranty
- Contact our support team to initiate a return
