APC SMART-UPS ON-LINE 3KVA
Features
APC Smart-UPS SRT 3000VA RM 230V
- Battery failure notification - Provides early-warning fault analysis on batteries enabling timely preventive maintenance
- ECO Mode - Operating mode that by-passes unused electrical components in good power conditions to achieve high operating efficiency without sacrificing protection
- Green mode - Patent-pending operating mode that bypasses unused electrical components in good power conditions to achieve very high operating efficiency without sacrificing any protection.
- LCD graphics display - Text and mimic diagrams that display modes of operation, system parameters and alarms.
- Rack/Tower convertible - Protects the initial investment in the UPS when migrating from tower to rack-mount environment.
Peace of mind that comes with full equipment compatibility and reliability of a leader
Provides pure sine wave output which is recommended by server manufacturers using active power factor corrected (PFC) power supplies. Safety agency tested and approved means that you can deploy Smart-UPS with confidence that they meet or exceed the industry's most rigorous standards.
Save time with easy and convenient remote accessibility.
Network manageable via serial, USB or optional Ethernet. Includes Powerchute® Network Shutdown Software for convenient monitoring and control, safe operating system shutdown, and innovative energy management capabilities.
Avoids costly power problems by keeping your IT equipment and data protected and available.
Network grade power conditioning protects from damaging surges and disruptive noise. The double conversion architecture provides tight voltage regulation, frequency regulation ,and zero transfer time to battery during power events.
Low operating and maintenance costs with proven reliability and intelligent battery management.
Intelligent battery management, pioneered by APC, maximizes battery performance and life through intelligent, precision temperature compensated charging. Automatic self tests insure battery reliability and warn customers in advance of battery replacement. Convenient, easy to connect, hot-swappable battery modules provide battery replacement without powering down.
Specifications
Technical Specifications
| Output power capacity | 2.7 KWatts / 3.0 kVA |
|---|---|
| Max Configurable Power (Watts) | 2.7 KWatts / 3.0 kVA |
| Nominal Output Voltage | 230V |
| Output Voltage Note | Configurable for 220 : 230 or 240 nominal output voltage |
| Output Voltage Distortion | Less than 2% |
| Output Frequency (sync to mains) | 50/60Hz +/- 3 Hz |
| Other Output Voltages | 220, 240 |
| Load Crest Factor | 3 : 1 |
| Topology | Double Conversion Online |
| Waveform type | Sine wave |
| Output Connections | (2) IEC 320 C19 (Battery Backup)(8) IEC 320 C13 (Battery Backup)(2) IEC Jumpers (Battery Backup) |
| Bypass | Internal Bypass (Automatic and Manual) |
| Nominal Input Voltage | 230V |
| Input frequency | 40 - 70 Hz (auto sensing) |
| Input Connections | British BS1363A, IEC-320 C20, Schuko CEE 7/EU1-16P |
| Cord Length | 2.44meters |
| Input voltage range for main operations | 160 - 275V |
| Input voltage adjustable range for mains operation | 100 - 275 (half load)V |
| Number of Power Cords | 1 |
| Other Input Voltages | 220, 240 |
| Battery type | Maintenance-free sealed Lead-Acid battery with suspended electrolyte : leakproof |
| Included Battery Modules | 1 |
| Typical recharge time | 3hour(s) |
| Nominal Battery Voltage | 96V |
| Replacement Battery | APCRBC152 |
| Expected Battery Life (years) | 3 - 5 |
| RBC Quantity | 1 |
| Extendable Run Time | 1 |
| Battery Volt-Amp-Hour Capacity | 505 |
| Interface Port(s) | RJ-45 Serial , Smart-Slot , USB |
| Control panel | Multi-function LCD status and control console |
| Audible Alarm | Audible and visible alarms prioritized by severity |
| Emergency Power Off (EPO) | Yes |
| Available SmartSlot™ Interface Quantity | 1 |
| Surge energy rating | 340Joules |
| Filtering | -- |
| Maximum Height | 85mm , 8.5cm |
| Maximum Width | 432mm , 43.2cm |
| Maximum Depth | 635mm , 63.5cm |
| Rack Height | 2U |
| Net Weight | 31.3kg |
| Operating Environment | 0 - 40 °C |
| Operating Relative Humidity | 0 - 95% non-condensing % |
| Operating Elevation | 0-3000meters |
| Storage Temperature | -15 - 45 °C |
| Storage Relative Humidity | 0 - 95% non-condensing % |
| Storage Elevation | 0-15000meters |
| Audible noise at 1 meter from surface of unit | 55.0dBA |
| Online thermal dissipation | 703.0BTU/hr |
| Protection Class | IP 20 |
| Brand | APC |
|---|---|
| Product Type | Power & Charging > UPS & Power Distribution > UPS |
| Weight | 18.104 kg |
| Warranty |
|---|
Note:
Warranty period is as stated above unless the manufacturer has chosen to specify a longer period.
All warranties are return to base unless otherwise specified.
Shipping Information
- Free NZ-wide shipping on orders over $299
- Standard delivery 2–5 business days
- Rural delivery may take an additional 1–2 days
- Same-day dispatch for orders placed before 2pm (weekdays)
Returns Policy
- 7-day returns on unused items in original packaging
- Faulty or damaged products covered under warranty
- Contact our support team to initiate a return
