GAT-12v25w - PoE World Gigabit Ethernet 802.3at to 12 VDC 25 Watt Output for Non-PoE Devices - GAT-12v25w

GAT-12v25w

GAT-12v25w - PoE World Gigabit Ethernet 802.3at to 12 VDC 25 Watt Output for Non-PoE Devices - GAT-12v25w

PoE World Gigabit Ethernet 802.3at to 12VDC 25 Watt Output for Non-PoE Devices - GAT-12v25w

This device works with any 802.3at switch, it takes the 44 to 56 volts from the PoE switch, and converts that voltage to 12 volts and removes power from the data - it works with gigabit data speeds. Can also work with an 802.3af switch if the output is used below 13 watts.

This PoE solution appears like a standard Class 4, 25 watt device. The PoE switch can send either polarity, and only 2 pairs are required for power, 4 pairs for gigabit data, 2 pairs for 10/100. The output is fully isolated from the input voltage. Grounding is of no concern. The output power is on a 2.1mm DC connector.

Details
Product Code	GAT-12v25w
Input Ethernet	10/100/1000 mb/s
Output Ethernet	10/100/1000 mb/s
Input Voltage	802.3af / 802.3at / passive 44 to 57 volts at 570 mA max
Output Voltage	12 volts +- 2% at 2.08 amps, 25 watts
Internal power use	350 mw ( keep alive 802.3af)
Operating Temperature	0°C - 50°C
Data	Transparent
Isolation	1500 Volts
Size	107 x 50 x 25 mm
802.3at	Class 4
PoE Power input Pins	1&2 and 3&6 – either polarity – mode A, 4&5 + and 7&8 minus – mode B, Shielded RJ45
Data output	Shielded RJ45
Power out DC connector	2.1 mm x 5.5mm female connector
LED status on Female RJ45	Right - Power In active = Green, Left - Power out active = Amber