RBmAPL-2nD - MikroTik mAP lite with QCA9533 650MHz CPU, 64MB RAM, 1xLAN, built-in Dual Chain 2.4Ghz 802.11b/g/n wireless with integrated antennas, RouterOS L4

RBmAPL-2nD

RBmAPL-2nD - MikroTik mAP lite with QCA9533 650MHz CPU, 64MB RAM, 1xLAN, built-in Dual Chain 2.4Ghz 802.11b/g/n wireless with integrated antennas, RouterOS L4

The MikroTik RBmAPL-2nD lite is our smallest 2.4GHz WiFi access point / Bridge. It is barely larger than a matchbox, we even had to use a special Ethernet port to match it’s slim profile. You can carry it anywhere: use as a travel router to extend that hotel internet to all your devices, or as a client device to improve your laptop signal range, the tiny mAP lite will be always with you. It comes with a built-in magnet, so you can attach it to any ferrous surface, or if those are not available, a metallic plate with an adhesive back is also included. It can also serve as a simple configuration tool for your servers, if there is no ethernet on your mobile device, plus, it neatly attaches to the rack with it’s magnet. The mAP lite is a dual chain 802.11 b/g/n device and operates in 2GHz.

Details
Product code	RBmAPL-2nD
Architecture	MIPSBE
CPU	QCA9533
CPU core count	1
CPU nominal frequency	650 MHz
Dimensions	48x49x11mm
RouterOS license	4
Operating System	RouterOS
Size of RAM	64 MB
Storage size	16 MB
Storage type	FLASH
MTBF	Approximately 100'000 hours at 25C
10/100 Ethernet ports	1
Wireless 2.4 GHz Max data rate	300 Mbit/s
Wireless 2.4 GHz Number of chains	2
Wireless 2.4 GHz standards	802.11b/g/n
Antenna gain dBi for 2.4 GHz	1.5
Wireless 2.4 GHz chip model	QCA9533
Wireless 2.4 GHz generation	Wi-Fi 4
Max TX Power	22dBm
Max RX Sensitivity	-96dBm
MicroUSB input Voltage	5 V
Number of DC inputs	2 (PoE-IN, MicroUSB)
Max power consumption	3.5 W
PoE in	802.3af/at
Cooling type	Passive
Passive PoE in input Voltage	10-60 V
Certification	CE, FCC, IC, EAC, ROHS
IP	IP20